BMRKC - CORRO CLEAN, 11511

  • MSDS: BMRKC
  • Manufacturer: PREMIER INDUSTRIAL CORP
  • Product Name: CORRO CLEAN, 11511
  • National Stock Number: 7930-00N026093
Product Identification

Product ID:CORRO CLEAN, 11511
MSDS Date:01/29/1990
FSC:7930
NIIN:00N026093
MSDS Number: BMRKC

Responsible Party
PREMIER INDUSTRIAL CORP
4500 EUCLID AVE
CLEVELAND, OH 44103
US

Emergency Phone: 216-391-8300

Info Phone: 216-391-8300

Preparer: G.F.S.

Cage: 18399

Contractor
PREMIER FARNELL CORPORATION
CLEVELAND, OH 44103-3736 US

Telephone: 216-391-8300

Cage: 18399

Ingredients

PROPANE, 2-METHYL-;(ISOBUTANE)

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: 10%


WATER;(DEIONIZED WATER)

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 85%


SODIUM BICARBONATE

CAS: 144-55-8

RTECS: VZ0950000

Fraction By Weight: 3-7%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:VAPORS IN HIGH CONCENTRATIONS ARE
ANESTHETIC AND IRRITATE UPPER RESPIRATORY SYSTEM. EXCESS INHALATION
MAY CAUSE DIZZINESS, GIDDINESS, AND NAUSEA.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYE:IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MNUTES AND CALL MD. SKIN:WASH THOROUGHLY WITH PLENTY OF WATER AND
SOAP. INHAL:REMOVE TO FRESH AIR. INGEST:GET MD IMMEDIATELY, SHOW
MSDS OR LA BEL. DO NOT INDUCE VOMITING.

Fire Fighting

Flash Point:-40F,-40C
Lower Limits:1.9%
Upper Limits:6.5%
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:EXPOS TO FIRE, HEAT OR PRLNGD SUNLT MAY
CAUSE BURSTING.IF USED IN CONFINED SPACES, HAZ VAPS MAY SPREAD OR
BUILD UP IN LOW AREAS. KEEP AWAY FROM HEAT,(SUPP DATA)

Accidental Release

Spill Release Procedures:FLUSH SMALL AMOUNTS TO SEWER WITH PLENTY OF
WATER. REMOVE ALL SOURCES OF IGNITION. VENTILATE THE AREA. CLEAN UP
WITH ABSORBENT MATERIAL. DIPSOSE OF AS A NON HAZARDOUS WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:EXPOSURE TO FIRE, HEAT OR PROLONGED
SUNLIGHT MAY CAUSE BURSTING. KEEP IN A COOL PLACE. KEEP AWAY FROM
HEAT, SPARKS, FLAMES, OR SOURCES OF IGNITION.
Other Precautions:IN CASE OF ACCIDENT/ILLNESS, GET MD IMMED.SHOW
LABEL/MSDS. DO NOT PUNCTURE, INCIN (OR BURN) CNTNRS. ALWAYS READ &
FOLLOW DIRECTIONS ON PROD LABEL.ADDITIONAL TECHNICAL DATA
SHEETS/MSDS AVAILABLE ON REQ UREST. PROFESSIONAL/INDUSTRIAL USE
ONLY.

Exposure Controls

Respiratory Protection:IF VENTILATION IS INADEQUATE, WEAR NIOSH/MSHA
APPROVED RESPIRATOR.
Ventilation:LOCAL VENTILATION RECOMMENDED. MECHANICAL VENTILATION
REQUIRED.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:SPARKS, FLAME OR SOURCES OF IGNITION.

Chemical Properties

HCC:V3
Boiling Pt:B.P. Text:11F,-12C
Vapor Pres:4.7
Vapor Density:2.0
Spec Gravity:1.0
pH:10
Evaporation Rate & Reference:>1 (WATER=1)
Solubility in Water:HIGH
Appearance and Odor:AEROSOL, WHITE FOAM.
Percent Volatiles by Volume:90

Stability

Stability Indicator/Materials to Avoid:YES
NO.
Stability Condition to Avoid:KEEP IN A COOL PLACE.
Hazardous Decomposition Products:NO.

Disposal

Waste Disposal Methods:DISPOSE OF WASTES IN ACCORDANCE WITH FEDERAL,
STATE, AND LOCAL REGULATIONS. DO NOT PUNCTURE, INCINERATE, OR BURN
CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.